ISO9001 VOLVO D7E Piston Connecting Rod , 0428-3400 Rod Assy Connecting

D7E 0428-3400 Connecting Rod Assembly For VOLVO Engine

OPERATING PRINCIPLE:

Connecting rod assembly is to integrate a number of connecting rods together, in order to better play its stability, connecting piston and crankshaft, and the force of the piston to the crankshaft, the reciprocating motion of the piston into the rotation of the crankshaft.

The connecting rod group consists of connecting rod body, connecting rod big head cover, connecting rod small head bushing, connecting rod big head bearing bush and connecting rod bolt (or screw). The connecting rod group bears the gas force from the piston pin and its own swing and reciprocating inertia force of the piston group, the magnitude and direction of these forces are periodic changes.Therefore, the connecting rod is subjected to alternating loads such as compression and stretching. The connecting rod must have sufficient fatigue strength and structural stiffness. Fatigue strength is insufficient, often cause connecting rod body or connecting rod bolt fracture, and then produce a serious accident of the whole machine.

TP connecting rod assembly have excellent fatigue strength and structural stiffness, for your excavator engine escort!

PREVENTS DROP IN COMPONENT VOLUMETRIC EFFICIENCY 

Attention should be paid to both abnormal wear and normal wear. The former may occur in a very short period of time, and can be judged by checking the quality of the oil and combining with the function of the system (such as whether the actuator moves normally, whether the speed drops, etc.); the latter should follow certain rules and should be integrated. Inspect and take timely measures.
Grease Management
The use of lubricating oil (butter) reduces wear on moving surfaces and prevents noise. When storing grease, dust, sand, water and other impurities should not be mixed in; it is recommended to use lithium-based grease G2-L1, which has good anti-wear performance and is suitable for heavy-duty conditions; when filling, try to squeeze all the old oil as much as possible. Remove and wipe clean to prevent sand from sticking.
Maintenance of the filter element
The filter element plays the role of filtering impurities in the oil or gas path, preventing it from invading the system and causing failure; various filter elements should be replaced regularly according to the requirements of the (operation and maintenance manual); when replacing the filter element, check whether there is metal attached to the old If metal particles are found on the filter element, timely diagnose and take improvement measures; use the pure filter element that meets the requirements of the machine. The filtering ability of the fake and inferior filter element is poor, and the surface of the filter layer and the quality of the material do not meet the requirements, which will seriously affect the normal use of the machine.
 

COMPANY PROFILE:

Guangzhou TP Cloud Power International Construction Machinery Co., Ltd,in【Starting with the apex technology of power machinery,challenge infinte possibility,providing superior technology and high value products to the world,committed to creating a cleaner and more comfortable earth society】,through research&development, production, sales of excavator engine parts, achieved sustainable development.

Our main products include various powder metallurgy parts such as piston rings, cylinder liners and powertrains for excavator engines,we through using lead step technology development for the overwhelming majority of customers with low cost has the original value of the products,in order to realize the engine such as lightweight,low fuel fee【environmentally friendly engine manufacturing】has made a contribution.We pursuit the highest quality,by the world's first-class speed,manufacturing world-class products efficiently.

OUR ADVANTAGES:

·Original Factory Guarantee

·Higher Efficiency

·Lower Fuel Consumption

·Longer Life

·Genuine Parts

FACTORY STRENGTH:

EXHIBITION
 

SHIPMENT

FAQ:

1. Are you manufacturer or trading company?

We are the OEM manufacturer, head Office is in HongKong China.

2. What products do you make?

We are engaged in manufacturing engine cylinder liner, piston, piston ring, cylinder liner kits, cylinder head gasket, engine gasket kits and Other core engine parts.

3. What scenario can your product be applied?

Our products are widely used in power fields such as construction machinery, generator set, commercial vehicle, passenger car. agricultural machinery, ship, etc.

4. Which countries and regions are your market extend all over?

Our markets includes North America, Western Europe and the Middle East, Southeast Asia, Africa South America and all over the world,for example:USA,Germany and Australia,UAE and Brazil and so on..

5. What is the standard of package?

We have Japanese TP Brand package, also have wooden case/carton/standard shipping package,Or custom-made packaging.

6. What is the delivery time?

Generally, we will arrange the goods within 24 hours after your payment; If some items are no stock, it will take 30-45 days to produce after received deposit.

7. What kind of payment terms do you have?

L/C, D/A, D/P, T/T, X-Transfer is also acceptable.

8.How can I get a quotation?

A complete quotation based on the details as follows in your inquiry:

a.Excavator brand name;

b.Excavator model number;

c. Engine model;

d.Part number;

e. Pictures;

f.Quantity;

g.Other requirements, such as Packing, Shipping and so on.

9.How do you pack the goods?

The products will be carefully handled by three steps:

a: Wrapped with packing paper or plastic bag;

b: Japanese TP brand box or customized box;

c: Put in an appropriate carton box or wooden boxes and be fixed firmly.

10.How can I know the status of my order?

We will keep you udpate the process of the preparation, to ensure all issues are resolved prior to the delivery.products pictures can be provided if required. We shall send out the goods immediately after confirmation and you will get the tracking information right away

11.How to guarantee your service?

· Strict inspection during production

· Strictly check the products before shipment to ensure our packaging in good condition

· Track and receive feedback from customer regularly

12.What will you do about quality complaint?

·We will respond to customer within 24 hours.

·Our QC will retest the same item in the warehouse, if confirmed it is quality problem, we will make corresponding compensation.

13.What is the warranty time of the products?

The warranty time is 18 months based on the item details; We don't provide warranty time for original and used products.