324-7382 Diesel Engine Piston

Diesel Engine Piston CAT 324-7382 265-1401 C9 Aluminum E336D/E330D

The Working Principle Of The Plunger Pump:

When the engine drives the transmission shaft to rotate, the connecting rod pushes the plunger to reciprocate in the cylinder block, and at the same time, the side of the connecting rod drives the piston to rotate together with the cylinder block, and the oil distribution plate is fixed. When working, under the action of the cam and the plunger spring, the plunger moves up and down repeatedly to complete the oil pumping task. When the convex part of the cam is turned, the plunger moves downward under the action of the plunger spring, and the upper part of the plunger is the pump oil chamber to generate a vacuum. At this time, the oil inlet on the plunger sleeve at the upper end of the plunger will be opened. The hydraulic oil in the oil passage of the oil pump enters the pump oil chamber through the oil inlet hole, the plunger moves to the bottom, and the oil inlet ends.

When the camshaft turns to the convex part of the cam to lift the rolling body, the plunger spring is compressed, the plunger moves upward, the hydraulic oil is pressurized, and part of it flows back to the upper body oil cavity through the oil hole. When the top surface of the plunger covers the oil inlet hole, the oil distribution chamber on the top of the plunger becomes a sealed space due to the small matching gap between the plunger and the cylinder liner, the plunger continues to rise, and the oil pressure in the pump oil chamber rises rapidly When the pump oil pressure is greater than the oil outlet spring, the hydraulic pump is pushed out, and the high-pressure liquid enters the oil cylinder through the main operating valve.

When the plunger is supplied with oil, it communicates with the chute on the plunger and the oil return hole on the cylinder liner, and the low-pressure oil path of the pump oil chamber is communicated with the middle hole and chute of the plunger head, the oil pressure drops, and the oil outlet valve Under the action of the spring, it is closed to stop the oil supply. The plunger continues to go up, and when the convex part of the cam turns over, under the action of the spring, the plunger goes down again to start the next cycle.

When the excavator is not working, the main control valve is in the neutral position, and the high-pressure oil passes through the neutral position of the main operating valve, and returns to the oil under the load-sensitive control, part of the control pump continues to work, and part of it returns to the oil tank. My personal understanding is: the neutral position of the main control valve is a large oil return line.

COMPANY PROFILE:

Guangzhou TP Cloud Power International Construction Machinery Co., Ltd,in【Starting with the apex technology of power machinery,challenge infinte possibility,providing superior technology and high value products to the world,committed to creating a cleaner and more comfortable earth society】,through research&development, production, sales of excavator engine parts, achieved sustainable development.

Our main products include various powder metallurgy parts such as piston rings, cylinder liners and powertrains for excavator engines,we through using lead step technology development for the overwhelming majority of customers with low cost has the original value of the products,in order to realize the engine such as lightweight,low fuel fee【environmentally friendly engine manufacturing】has made a contribution.We pursuit the highest quality,by the world's first-class speed,manufacturing world-class products efficiently.

OUR ADVANTAGES:

·Original Factory Guarantee

·Higher Efficiency

·Lower Fuel Consumption

·Longer Life

·Genuine Parts

·OEM Replaceable Parts

·4000Hrs Warranty

·Compact Design

·Providing Optimum Dynamicity Of High Stability

·High-Precision Motivation Adjustment

·Easy Replacement In Customer System

·The Highest Level Of Durability In Extreme Conditions

·Reduce Wear And Prolong Life

·Longer Service Life

·Better - Resistant And Heat - Resistant

·High - Precision And High Stability

·OEM

·Professional Technical Team

·A Full Range Of One - Stop Resources

·The Most Trustworthy Quality

FACTORY STRENGTH:

EXHIBITION
 

PACKAGE&SHIPMENT

FAQ:

1. Are you manufacturer or trading company?

We are the OEM manufacturer, head Office is in HongKong China.

2. What products do you make?

We are engaged in manufacturing engine cylinder liner, piston, piston ring, cylinder liner kits, cylinder head gasket, engine gasket kits and Other core engine parts.

3. What scenario can your product be applied?

Our products are widely used in power fields such as construction machinery, generator set, commercial vehicle, passenger car. agricultural machinery, ship, etc.

4. Which countries and regions are your market extend all over?

Our markets includes North America, Western Europe and the Middle East, Southeast Asia, Africa South America and all over the world,for example:USA,Germany and Australia,UAE and Brazil and so on..

5. What is the standard of package?

We have Japanese TP Brand package, also have wooden case/carton/standard shipping package,Or custom-made packaging.

6. What is the delivery time?

Generally, we will arrange the goods within 24 hours after your payment; If some items are no stock, it will take 30-45 days to produce after received deposit.

7. What kind of payment terms do you have?

L/C, D/A, D/P, T/T, X-Transfer is also acceptable.

8.How can I get a quotation?

A complete quotation based on the details as follows in your inquiry:

a.Excavator brand name;

b.Excavator model number;

c. Engine model;

d.Part number;

e. Pictures;

f.Quantity;

g.Other requirements, such as Packing, Shipping and so on.

9.How do you pack the goods?

The products will be carefully handled by three steps:

a: Wrapped with packing paper or plastic bag;

b: Japanese TP brand box or customized box;

c: Put in an appropriate carton box or wooden boxes and be fixed firmly.

10.How can I know the status of my order?

We will keep you udpate the process of the preparation, to ensure all issues are resolved prior to the delivery.products pictures can be provided if required. We shall send out the goods immediately after confirmation and you will get the tracking information right away

11.How to guarantee your service?

· Strict inspection during production

· Strictly check the products before shipment to ensure our packaging in good condition

· Track and receive feedback from customer regularly

12.What will you do about quality complaint?

·We will respond to customer within 24 hours.

·Our QC will retest the same item in the warehouse, if confirmed it is quality problem, we will make corresponding compensation.

13.What is the warranty time of the products?

The warranty time is 18 months based on the item details; We don't provide warranty time for original and used products.